Packed in cartons, 25kg/carton. Each carton contains five vacuum bags, 5kg/bag.
5-6 after receiving T/T deposit
Plastic defoaming masterbatch(level C)
Model Number: XPBX02;
1. Made by ultrafine powder.
2. High-grade inorganic raw material.
3. Good plasticizing effect.
4. High water absorbing capacity.
5. Good universality.
6. Good whiteness.
7. It can absorb water which is 20% of its own weight from the raw material.
8. It can improve the appearance and mechanical properties of your plastic products.
It’s widely used in recycled plastics to eliminate the bubbles, cracks, speckles, and other problems caused by moisture. It can be used in fiber, film, blow molding, injection molding, extrusion molding etc.
Time to keep (after mix)
store in cool,dry and ventilated place.Avoid direct exposure to the sun as well as heat source and humidity. the expiration period is one year.
(The above technical information is only for reference. The actual values may change due to the differences between environments, measure instruments, and accuracy.)
Caution: The well mixed masterbatch with raw materials and plastic must be used up within 24 hours, otherwise, the desiccant masterbatch may lose efficiency because of absorbing the moisture in the air, and it is likely to cause the phenomenon of clogging the filter.
South Africa Plastics and Rubber Expo (2013)
If you are interested please contact us!
BoXuan would be your best choice! welcome to visit our factory and negotiate!